Products - Refrigeration & HVAC

Jump to: Presscon Range, Joule Range, MP15 Range, TACm Range, Other

Presscon Range

A Modular bassed control system which can be used for refrigeration or HVAC
presscon

Presscon
Commercial and Industrial Refrigeration Control System. Can Be configured to be either a Multi Rack Control, System Control, DDC Control or Case Control.



pressnet software

Pressnet Software/Interfacing Hardware
A computer based hardware and software package which allows you to monitor hundreds of refrigeration and HVAC channels

sensor card Sensor Card
8 or 32 Channel cards for input signals from pressure transducers, temperature sensors, resistance, humidity, switching and voltage

relay card Relay Card
8 channels, each output 240VAC, 5A
power monitor Power Monitor
Class 0.5 precision unit for monitoring power in unbalanced 3 phase systems.
powersupply

Power supply with filter
12V 5A power supply for Presscon including power filtering and surge protection



Joule Range
jouletemp

JouleTemp
Controller for temperature and humidity with web based control and logging.



jouletemp/pm

JouleTemp/PM
A pannel mount version of the JouleTemp with a brushed stainless steel face


joulealarm JouleAlarm
Multi-Channel Alarm and monitro unit for temperature, pressure contacts and humidity with web based control and logging
mdpcb mdPCB
An option board for Fan/Heater Control in Freezer Rooms
jouleconnect JouleConnect
Management software for JouleTemp and JouleAlarm Controls 

MP15 Range

Automatic 3 or 1 Phase Motor Protection Relay.
mp15

MP15
Three Phase, Octal Based, Fault memory, Adjustable start delay


mp15d MP15D
Three Phase, DIN mount, Fault memory, Adjustable start delay
mp15e MP15/E
Three Phase, Octal Based, Fixed start delay, lower cost
mp15de MP15DE
Three Phase, DIN mount, Fixed start delay, lower cost
mp15d1 MP15D1
Single Phase, Din mount, Fault memory, Adjustable start delay

TACm
tacm TACm
Coolroom and Freezer Room Controls with Defrost, Alarm and Logging.
TACm/PM
A pannel mount version of the TACm with a brushed stainless steel face
mdpcb mdPCB
An option board for Fan/Heater Control in Freezer Rooms
tacm/med TACm/MED
Heating/Cooling special version of TACm. Ideal for Air conditioning where no defrosts are required. Ideal in ranges 5°C~30°C in particular for Wine Cellars

Probes/Sensors

Can be used with either: Presscon, JouleTemp, TACm, Quadro, VatPac, Powermiser, RAMiv9 or TA1
humidity sensor Humidity Sensor
Gas leak sensor Gas Leak Sensor
A variety of sensors for the different types of refrigerant. Used with the RAMiv9 and with Presscon (option board required)
pressure sensor Pressure Tranducer
probe Probes - View all models
Hight/Low Temperature. MPROBE, CPC, GUARDIAN, CAREL or OZTECH. 1.5m to 6m

Other
ad2 AD2 - Automatic Voice Dialler
Provides Remote Alarm Warnings by calling up to 6 phone numbers and playing the recorded alarm message
ramiv9 RAMiv9
Refrigerant Leak Detection and control System. Cost effective, easy to setup and use
powermiser POWERMISER
Reduces electrical power wastage associated with anti-sweat heaters in refrigerated display cases by cycling the heaters according to the humidity in the store
vatpac VATPAC
Temperature control with timing and safety controls specifically for use with bulk Milk Vats
quadro+ mk8 Quadro+ Mk 8
dpm02 DPM02
Versatile Digital Panel mount temperature display
psb30 PSB30 Battery Backup
Battery Backup system for food loss alarm systems, supplied standard with AD2 Dialler.
pl10 PL10 Power Filter
Power filter and surge protector for control systems and sensitive electronics. PL10 employs six MOV’s to absorb power surges up to 1400Amps