A precision pre-set alarm thermostat with over temperature indicator. TA1 is a versatile and reliable control which connects to MiniTemp and Presscon, plus superseded Phasefale food loss alarm panels and is a proven performer. Supplied integral with a 6m sensor and interchangeable electronic module. DIP switch settings for Frozen Food, Meat & Dairy cabinet monitoring.
M Probe, M Probe (H)
Temperature sensor used in many temperature control and alarm products such as SuperTAC, TACm and Presscon. A precision thermistor of 0.2¡C accuracy and supplied on a 6M lead. Over many years, the reliability and long term accuracy of the M probe is the basis for many products. The M probe(H) is designed for extended temperature operation on discharge lines of compressors.
P Sens(L), P Sens(H), P Sens(A)
Electronic pressure transducers for use with Presscon and SuperTAC. All stainless steel water resistant construction plus internal hermetic sealing makes these transducers ideal for operation in the harsh environments found in refrigeration plant. A high level output voltage from 1-6V DC is available in the three ranges 0-100psig, 0-500psig and -15+30psia (for ammonia based systems).
Option circuit board for TACm and TC1 adding full electric defrost fan and heater output functions to the control. Supplied as a kit and simply fitted, the outputs are each rated at 250VAC 20A or a full 1Hp.
Power filter and surge protector for control systems and sensitive electronics. PL10 employs six MOV’s to absorb power surges up to 1400Amps (and clamping them to 275VAC) and a "pi" filter circuit to reduce high frequency noise such as spark noise from contactors. PL10 is specified wherever a control system’s operation is vital and the cost of damage or miss operation from a surge is too great to consider.
PSB30 Battery Backup
Battery Backup system for food loss alarm systems, supplied standard with AD2 Dialler. Supplied in a plastic surface mounting enclosure, PSB30 includes a 7 Amp Hour 12V Gel battery and special charging circuitry to maintain the battery in peak fully charged condition. Temperature compensated trickle and boost charge cycle prevent damage to and extend the life of the battery.
Electronic design
Electronic manufacturing
Industrial and Commercial controls
www.phasefale.com.au